Filter element for Zündapp models -suitable e.g. for:
Zündapp
441 C50 Super
510 Sport Combinette / Falconette
517
428/429 Combinette
433 Super Combinette
515/516 Sport Combinette / KS50
Zündapp KM48/KM50 engines, Zündapp CombimotCorresponds to and replaces the following Bing carburettors:1/10/7, 1/10/8, 1/10/9, 1/10/10, 1/10/12, 1/10/13, 1/10/23, 1/10/24, 1/10/25, 1/10/26, 1/10/28Can also be used for1/9/2, 1/9/3, 1/9/4, 1/9/5, 1/9/6, 1/9/7.Attachment to the engine:Clamp connection with diameter Ø=16mmPlease note that a bushing is sometimes required, as the engine connection, i.e. the outer diameter of the intake manifold, can also be 10, 12 or 14mm!
Carburettor compl. 12mm, for Victoria M50/M51
Zündapp engine 247(M50 Bergsteiger Express Radexi, ILO FP50,
Corresponds to and replaces the following original 12mm Bing carburettors: 1/12/18, 1/12/19, 1/12/27, 1/12/29, 1/12/54, 1/12/61, 1/12/66, 1/12/76, 1/12/77, 1/12/78, 1/12/85, 1/12/87, 1/12/110, 1/12/131, 1/12/135, 1/12/176
Attachment to the motor:
Clamp connection with diameter Ø=16mmPlease note that a bushing is sometimes required, as the engine connection, i.e. the outer diameter of the intake manifold, can also be 14mm.
17 mm SRF carburettor for mopeds and mopeds (e.g. Zündapp Bergsteiger, Kreidler etc.) on which a Bing carburettor of type SRF is fitted.
Passage: 17mm
Diameter clamping flange: 23mm
Diameter air filter side: 60mm
Cover plate complete, with seal, push pin, start slider - as illustratedDimensions:Internal dimensions for seal approx. 31.6 mm X 20.1 mmCover plate: 34x22.8x12.0
Cover plate for SRF carburettor types, complete set with gasket, pipe bend, adjusting screw, start sliderInternal dimensions for gasket approx. 22.5 mm x 35.2 mm