Clamp complete with bolts and nuts for attaching the saddle to the seat post (seat tube)
Clamping spindle screw for seat tube fastening for many mopeds of the 50s and 60s
original Denfeld trim strip for seat bench, length 100cm, aluminium
Stainless steel bolt with nut for saddle mounting
Guide slider for Wittkop moped swinging saddle, suitable for all Wittkop swinging saddles - used on many mopeds from the 50s and 60s Victoria: Tory, Vicky IIIN, Vicky IV, Victoria Vicky III DKW - Zweirad-Union: various NSU: NSU-Quickly
Inner pressure spring for saddle, galvanised, as original - Made in Germany-
Moped swinging saddle complete, with enclosed black saddle cover.Suitable for many mopeds from the 50s and 60s.Sturdy saddle frame with 10 longitudinal springs and 2 compression springs - like the "Wittkop" modelSaddle tube mount 22mm - (standard on almost all German mopeds) Scope of delivery: Saddle frame completely ready to mount, saddle cover enclosed incl. 4 fastening rivets, simple assembly.
Connecting cover + "Denfeld" plate + 2 screws original Denfeld spare part
Outer compression spring for NSU saddle, bright zinc plated in top quality, Made in Germany
New moped saddle available in cream or grey. Easy to fit, completely ready to install, simply attach to the seat post and screw on.
Saddle cover for spring saddle e.g. Wittkop Dimensions approx. 26X25 cm
the double saddle cover with the "spider" symbol Replacement saddle cover for mounting on original saddles. Wittkop saddle frame Important information about the saddle cloth "Denfeld "or "Wittkopp":Please note that these saddle cloths are so-called "Wittkop" saddle cloths. "These saddle cloths must be stretched on the corresponding underframe to obtain the corresponding elasticity.The saddle cloth is therefore approx. 4 cm shorter than the old cover that is still on your frame.This is not a defect and must be so!The saddle corners Wittkopp or Denfeld are supplied with the original saddle covers. tools from the 1950s and are therefore a perfect fit.
Wittkop saddle frame in original design, completely new The saddle is ready to mount and only needs to be attached to the seat post! Comfortable seat - substructure with 10 springs at the top and 2 compression springs at the bottom. Was fitted to many mopeds of the 50s and 60s
Saddle springs for moped saddle "Wittkop" - set of 10 pieces
20 special screws + nuts and spring washers for fastening the decorative moulding
suitable e.g. for:Bergsteiger M 25, 50, Automatic Mofa, ZR 20, 10, 30, ZD ZB 22, ZA 40, ZX ZL ZS StarDimensions: 22mm, 25mm, 30mm diameter, total length approx. 250mm
Spring plate for compression spring moped swing saddle Guide slider for moped swing saddle Wittkop, suitable for all Wittkop swinging saddles - used on many mopeds of the 50s and 60s (Victoria, DKW, NSU ) Victoria: Tory, Vicky IIIN, Vicky IV, Victoria Vicky III DKW - Zweirad-Union: various NSU: NSU-Quickly
Moped saddle with standard mount for seat tube, fits almost all common mopeds from the 60s - 80s e.g. Zündapp (Bergsteiger and others) Hercules Rixe Puch Göricke Kreidler and much more.
New Zündapp seat for various Zündapp mopeds and mokicks, e.g. Super Combinette Type 433, Sport Combinette Type 515 Sport Combinette KS 50 Type 510, Falconette KS 50 type 510, , KS 50 type 515 and much more. Dimensions approx. Length: approx. 62 cm Width: approx. 22 cmDistance rear mounting 70mm Attention: compare the specified models and dimensions! - To avoid unnecessary and costly returns for both parties, please only order if these specifications are suitable for your purpose
Seat bench for Zündapp models e.g. C50 Sport GTS 50 KS 50 Typ. 517 Top quality! C 50 Sport 517 GTS 50 Type 517 KS 50 Type 517 KS 100 Type 518