Rear light bulb, 6 volts, 3 watts BA 15S base
Bulb 6V 2.7 W Matching: Tail light bulb: 6V 0.6 W for lighting systems with a total output of 6V 3 W until approx. the end of 1955
Standard single filament bulb 6 V 15 W for most moped lamps
e.g. suitable for the following models - however, please note the diameter of 78 mm (light outlet), as some vehicles were equipped differently depending on the year of manufacture. Diameter to housing: approx. 90 mm Bauer, Gritzner, Panther, Rixe, NSU, Express-Radexi, Goebel, Göricke, Heidemann, Meister, Miele, Rabeneick, Rex, Vicky III DKW Hummel Zündapp Combinette Hercules 215 and 216
New headlight chrome ring for e.g. Zündapp CS 50, Kreidler etc. - Inner diameter approx. 100 mm - Outer diameter approx. 115 mm - Installation diameter approx. 109 mmSuitable for e.g: C 50 Sport 517-21C 50 Sport Type 517-028R 50 Scooter 561-003 3-speed manualRS 50 ScooterSport-Combinette Type 515-041Type 510 Sportcombinette
New complete headlamp assembly for the Quickly L, ready to fit – (bulb not included)
Dimmer switchSwitch position 1-0-2 and horn buttonSwitch for mounting on the handlebars
Headlight insert for Hummel 101 models with integrated headlight,Hummel 102,112 and 113.Attention: Headlight light is not adjustable!for bulb 6V BAX 15 D
New contact plate for the Vicky 4 light switch and other mopeds
suitable for model M3, new and original - incl. cover
Headlight insert for Zündapp Bergsteiger M 25 M50 and Combinette 428/429approx. 120 Outer diameterLight emission approx. 100Installation diameter approx. 115for 6V BAX 15 D bulb
New headlight insert for Zündapp - suitable e.g. for C50 Sport Type 517-21 C50 Sport Type 517-028 R50 Scooter 561-003 3-speed manual transmissionRS 50 ScooterOuter diameter approx. 135mm
Ignition light switch for various Zündapp modelswith universal key Flat plug connection Suitable for the following Zündapp models: C 50 Sport 517-21 C 50 Sport 529-010 C 50 Super 441-01 GTS 50 - TYPE 529 - 020 - 024 GTS 50 TYPE 517-39 / 517-40 KS 50 Super Sport 530-500 KS 50 WC 530-01 R 50 scooter 561-003 3-speed manual gearbox Sport-Combinette type 515-041 Star 2 462-021 ZA 25 460-02 ZA 40 460-03 ZD 10 446-210 ZD 20 Type 446-40 ZD 25 446-420 ZD 30 Type 446-20 ZD 40 446-300 ZD 50 446-422 ZL 25 460-0
6 V 15/15 W for headlights Attention only for EXPORT vehicles with high/low beam!
Knurled screw incl. locking bracket for fastening the headlight insert (chrome ring)for Union headlights with chrome ring fastening at the bottom.
new light switch in original design for various Zündapp models,e.g. Combinette 433, Bergsteiger M25, M50, Falconette Type 435
for Union headlightssuitable for: Velo-SolexNSU-Quickly various mopedsFunction: on-off, no short-circuit switching
Light switch for installation in headlights, suitable for various mopeds built at that time Function light on/off, engine off (short-circuit circuit) Width of the circuit board: 45 mm Spacing of the mounting slots (4 pieces) approx. 35 mm e.g. for Express, Hercules, Triumph, Zünapp, Rex, Miele, Meister mopeds.
Light switch for fitting into headlamps, suitable for various mopeds from that periodFunction: Lights on/off, engine off (short-circuit circuit)Circuit board width: 45 mmSpacing between mounting slots (4 in total): approx. 35 mmContact tab for bulbHigh-quality designFitted to many mopeds in the 1950s and 1960se.g.: Bauer, Express, Gritzner, Panther, Rixe, Göricke, Heidemann, Meister, Miele, Rabeneick, Rex, Vicky, Auto-Union (DKW), Hercules
Light switch for fitting into headlights, suitable for various mopeds from that eraFunction: Lights on/off, engine off (short-circuit circuit)Circuit board width: 45 mmSpacing between mounting slots (4 in total): approx. 35 mmContact tab for light bulbHigh-quality designFitted to many mopeds in the 1950s and 1960se.g.: Bauer, Express, Gritzner, Panther, Rixe, Göricke, Heidemann, Meister, Miele, Rabeneick, Rex, Vicky, Auto-Union (DKW), Hercules
fit for:DKW Hummel 101 DKW Hummel 102 DKW Super Hummeland similar Models from Zweirad-Union
Headlight housing for Mobylette MotobecaneColour: greenThe item is new
Headlight for Motobecane Mobylette MBK 51 and other models - 140,150
Glass for various mopeds with 78mm light outlet - please note! suitable for Union headlights on many mopeds e.g. for Bauer Gritzner Express Radexi I and Radexi II Panther Rixe Göbel Göricke Heidemann Master craftsman Miele Rabeneick REX Vicky III
Headlight housing type Union for mopeds of the 50s,painted silver.Suitable e.g. for:NSU QuicklyExpress Radexi 1GritznerPanther, Rixe and others.
suitable for mopeds of the 50s - 1-point screw fastening
Headlight insert for moped headlights ("Union" headlights)Light outlet 78 mm, suitable e.g. for Vicky 3, DKW Hummel 101 - old version (with separate headlight)
Rear light mount for Quickly N and rear light, cream-coloured
Rear light bracket for Union rear lights from the 1960s and 1970s.For example, fitted to Velo-Solex, Sachs-Hercules mopeds and many others.
A rear light from the 1950s, fitted to various mopeds. e.g. NSU, Hercules
Tail light complete with black rubber pad suitable for many mopeds and mopeds.e.g. Hercules, Solex, DKW, Victoria etc.
for Union rear light suitable e.g. for DKW Hummel, NSU Quickly L DKW - Zweirad-Union: Hummel Luxus, Hummel Standard, Super Hummel, Victoria (ZU)
Rear light type "Impex" design of the 50s,installed on many mopeds such as Victoria (Vicky III), DKW Hummel, Zündapp Combinette
Reflector for Union headlamp, 17-watt version e.g. for Bauer Gritzner Express Radexi I and Radexi II Panther Rixe Göbel Göricke Heidemann Meister Miele Rabeneick REX Vicky III Victoria Tory
Fixing clips for reflector/chrome ring 2 pieces + retaining spring are usually required.
Retaining spring f. bulb Union headlight e.g. for: ictoria: Nicky, Tory, Vicky IIIN, Vicky IV DKW - Zweirad-Union: various, Hummel Luxus, Hummel Standard, Victoria (ZU) NSU: NSU-Quickly
Rubber grommet on the headlight for various Zündapp models: Zündapp 433 Super Combinette (266, 3g) 440 C50 Super (265, 2g) 441 C50 Super (266/278, 3g) 510 Falconette (276, 4g) 510 Sport Combinette (267, 3g) 514 KS100 (281) 515 Sport Combinette / KS50 (267, 3g & 276, 4g) 516 KS50/KS50 Super SL (283, 5g) 517 C/CS50/GS/GT50 (278, 3g NL) 517 C50 Sport (278, 3g) 517 GTS50 (280, 4g) 517 KS50/GTS50 (280, 4g) (NL) 518 KS100 (282/286)
2 retaining clips + 1 retaining spring for light bulb to attach the reflector
for old mopeds from the early 50s with 3 watt light output
Special key for mounting the light switch with slotted nut
Tail light bulb6V 0.6 W for 3 watt lighting systemsRequired for lighting systems with a maximum output of 3 watts.
Complete tail light with test mark for various mopeds and mopeds - e.g Zündapp KTMPuch Rixe and many more.
Complete rear light with cream-coloured base for various mopeds and mopeds.Suitable e.g. for DKW, Victoria, Express, Solex and many more.
as original, with fold in the centre, 2-point attachment
Matching tail light base for oval tail light with porthole