Ersatzteile suchen: allgemein nach Fahrzeugmarke oder speziell nach Deinem genauen Modell
chrome-plated, suitable for moped exhaust silencer diameter 55mm
Mounting clamp for moped silencerchrome-platedDiameter 60mmSuitable for various models,e.g: Zündapp - C 50 Sport 517-21 Zündapp - C 50 Sport 529-010 Zündapp - C 50 Super 441-01 Zündapp - CS 25 448-14 Zündapp - CS 50 448-01 Zündapp - CS 50 448-310 Zündapp - GTS 50 TYPE 529 026 - 029 Zündapp - GTS 50 TYPE 517-39 / 517-40 Zündapp - GTS 50 TYPE 529 - 020 to 024 Zündapp - GTS 50 WK Type 540-18 Zündapp - M 25 Bergsteiger 434-02 Zündapp - M 50 Bergsteiger 434-01-Zündapp - R 50 Roller 561-003 3-speed manual transmission -Zündapp - Star 1 462-020 Zündapp - Star 2 462-021 Zündapp - X 25 460-014 Zündapp - ZA 25 460-02 Zündapp - ZA 40 460-03 Zündapp - ZD 10 446-210 Zündapp - ZD 20 Typ 446-40 Zündapp - ZD 25 446-420 Zündapp - ZD 30 Typ 446-20 Zündapp - ZD 40 446-300 Zündapp - ZD 50 446-422 Zündapp - ZE 40 Type 460-09 Zündapp - ZL 25 460-04Zündapp - ZR 10 Type 447-110 Zündapp - ZR 20 Type 447-02 Zündapp - ZR 30 Type 447-11 Zündapp - ZS 25 Type 460-05 Zündapp - ZX 25 460-010 Zündapp - ZX 25 460-013
mit Halter hinten mit Motor 276 - 220 - 221BlechbananeDurchmesser 70 mm Krümmeranschluss 30 mm
Auspuffanlage komplett für Zündapp Mofa, bestehend aus: Auspuff-Topf (Durchmesser 55 mm passende Klemschelle Reduzierbuchse Krümmer-Topf Auspuffkrümmer Befestigungsschelle für Auspuff
Clamping ring between exhaust and manifold, various Zündapp models e.g: C 50 Sport 517-21 C 50 Sport 529-010 C 50 Super 441-01 GTS 50 - TYPE 529 - 020 - 024 GTS 50 TYPE 517-39 / 517-40 R 50 Scooter 561-003 3-speed manual gearbox RS 50 scooter Type 510 Sportcombinette ZD 20 Type 446-40 ZD 25 446-420 ZD 40 446-300 ZD 50 446-422 ZE 40 Type 460-09
Diameter 60 mm; length 68 cm; manifold connection: 26 mm Exhaust, silencer Zündapp Exhaust bracket: Mounting hole spacing approx. 33/34 mm. Holder ''centred measured'' from the rear approx. 320 mm.suitable e.g. for: M25 Bergsteiger 434-02 M50 Bergsteiger 434-01Type 429 SupercombinetteType 433 SupercombinetteType 510 Sportcombinette
Clamp for exhaust34 mmSuitable for:Kreidler, Puch, Hercules etc.
Length 68 cm ; Elbow connection : 26 mm Diameter approx. 60 mm - Distance from elbow connection to start of bracket approx. 28.2 cm
Automatic moped 442Automatic type 444 M25 Bergsteiger 434-02 M50 Bergsteiger 434-01ZA 25 460-02ZA 40 460-03 ZD10 446-210 ZD30 type 446-20 ZR10 type 447-110 ZR20 type 447-02 ZR30 type 447-11
26 mm manifold connection, total length (measured in the centre of the bend) approx. 18cm DKW Hummel Standard - short version
26 mm elbow connection, total length (measured in the centre of the elbow) approx. 30 cm - Medium version
Exhaust manifold Fichtel & Sachsfor vehicles with Sachs engineshort versionchrome-platedPipe diameter 28 mm
Exhaust manifold, new for DKW Hummel Super and Luxus, extra long versionLength from bend approx. 47 cm, straight length after bend approx. 33 cmSuitable for type 113
Exhaust manifold for DKW Hummel Super and Luxus, Zweirad-UnionLong version (approx. 44cm, measured from the bend)Diameter: 26 mmBend measured from the end approx. 9cmHigh quality at a favourable price
Exhaust manifold for Victoria Vicky Exhaust connection approx. 26 mm / cylinder connection approx. 28 mmTotal length approx. 45 cm
Exhaust manifold for Sachs 50S engine suitable for many mopeds of the 50s and 60s e.g. Hercules. KTM, Miele Connection 32 mm
Suitable for various vehicles with Sachs engine, especially older models (50s and 60s)chrome-plated Tube diameter 28 mm length approx. 38.8cm
Exhaust manifold for Zündapp Type 517, fan cooling -Exhaust connection: 30 mmCylinder connection: 32 mm (inside)Total length: approx. 25 cm, straightsee no: 510-22.611 510-22.612 510-22.615 511-22.604 516-22.103 511-22.102 e.g. for: Zündapp KS 75 Type 511-320Zündapp KS 75 Type 511-321 Zündapp KS 50 Super Type 515 (up to FG-No. 5445000) Zündapp KS 50 Super Type 515 (from FG-No. 5445001) Zündapp KS 50 Super SL Type 516-001 (up to FG-No. 6209473) Zündapp C 50 Super Type 441-05L2Zündapp C 50 Super Type 441-05L3Zündapp C 50 Super Type 441-05L4Zündapp C 50 Super Type 441-05L5Zündapp C 50 Super Type 517-05L9Zündapp Super Combinette Type 517-09L0Zündapp Super Combinette Type 517-09L1
Exhaust manifold for 30 mm connection on the pot and 36 mm on the cylinder e.g. for Zündapp GTS ZD CS KS
Exhaust manifold Zündapp for various models. models e.g C 50 CS 50 GTS 50 KS 50 Cylinder connection 36mm Exhaust connection 32 mm, single bend
Exhaust manifold for Zündapp Combinette Type 423
Exhaust manifold Zündapp Combinette for types 429 and 433 (Supercombinette)
Length : approx. 500mmManifold inner diameter : approx. 23mmHole spacing / manifold flange approx. 40mm
Neur Krümmer für Zündapp Bergsteiger M 25/50 Zylinderanschluss 26 mm , passend bis bis Fg.-Nr 1 435 573 orig. Nr. 434 22 604
Exhaust manifold suitable for Zündapp RS50Exact fit
Exhaust manifold Zündapp various modelsModels e.g.: ZB22, ZA 25 460-02 ZD10 446-210 ZR20 Type 447-02
Manifold Zündapp cylinder connection 32 mm suitable for ZD 20, ZD 40, ZD 50Pipe connection 26 mm
Exhaust silencer for Sachs 50/2 models in original look!The tailpipe is flattened at the side.Protects the rims from dirt, as the exhaust gas flows off to the side. Diameter, as original, 60 mm, therefore first-class performanceDimensions:Ø outside: 60 mmConnection diameter inside: 28 mmConnection diameter outside: 30 mmLength: 57 cm
Exhaust silencer for older mopeds e.g. Hercules, Triumpf Fips, Sachs...with mounting clamp Dimensions:The diameter for the manifold connection is approx. 28 mm, the total length of the exhaust silencer including the small end piece is 37 cm, the diameter of the silencer is 50 mm.
Kreidler mokick or moped (up to 50 km/h), manifold connection 32 mm - chrome-plated two-piece - blunt end piece, 70 mm diameter
Exhaust for Zündapp model 442, also for various mopeds of the 50s and 60s suitable e.g. forAdler, Bastert, Bauer, Bismark, Goebel, Göricke, Hercules, Miele, Rabeneick,Sachs,Simson, Zündappdiameter 55mm; length approx.57cm; manifold connection: 28 mm
Exhaust for Zündapp models - e.g. Bergsteiger M 25 Bergsteiger M 50 Supercombinette Sportcombinett Diameter 60 mm; Length 68 cm ; Manifold connection : 26 mm
Exhaust for various Zündapp models - now incl. mounting clamp -suitable e.g. for C 50 Sport 517-21 C 50 Sport 529-010 C 50 Super 441-01 GTS 50 TYPE 517-39 / 517-40 GTS 50 - TYPE 529 - 020 - 024 GTS 50 - TYPE 529 - 026 - 029 Star 1 462-020 Star 2 462-021 ZA 25 460-02 ZD 10 446-210 ZD 40 446-300 ZL 25 460-04 ZS 25 Type 460-05 ZX 25 460-010 ZX 25 460-013 Roller R 50 Diameter 60 mm Length approx. 690 mm Manifold connection 26 mm
Exhaust silencer for Zündapp C50,C 50 Sport (tuning) from Jamarcol (lettering at the end of the silencer) Dimensions: Diameter approx. 70 Manifold connection 32mm Length approx. 770 mm
Exhaust, cigar shape, suitable for various Zündapp models such as type 510 Sport Combinette, 517 Falconette, GTS, KS 50also for various other mopeds such as DKW, Hercules, etc. Dimensions:Total length approx. 690mm, diameter approx. 70mm, manifold connection 32mm
New exhaust for Zündapp Combinette types - with long mounting bracket -diameter 55 mm; length 57 cm ; manifold connection : approx. 26 mm
Type: N140TL, N150, 40, 50 85, 88, 89
Mobylette exhaustChromeType 88Suitable for:AV-10AV 51AV-7
Clamp clamp Between manifold and pot suitable e.g. for Zündapp and others C 50 Sport 529-010 C 50 Super 441-01 GTS 50 - TYPE 529 - 020 - 024 M 25 Bergsteiger 434-02 M 50 Bergsteiger 434-01 Type 510 Dimensions: Inner diameter approx. 28 mm, width approx. 20 mmchrome-plated
Exhaust clamp for various mopeds. Mopeds, chrome-plated 70 mme.g. for: Zündapp - KS 50 Sport Type 530 - 51 -Zündapp - KS 50 Super Sport 530-500 -Zündapp - KS 50 WC 517-52 -Zündapp - KS 50 WC 530-01
new exhaust manifold for Zündapp model 442, chrome-plated
Exhaust manifold for Zündapp moped: Zündapp ZX 25 Type 460-013Zündapp ZL 25 Type 460-040Zündapp ZL 25 Type 460-041Zündapp ZS 25 Type 460-050Zündapp ZS 25 Type 460-051Zündapp X 25 Type 460-014 (up to 9/1983)Zündapp X 25 Type 460-014 (from 9/1983)Pipe diameter 18mm, cylinder flange 36mm
Exhaust muffler Zündapp suitable e.g. for: C 50 Sport C 50 Sport 529-010 CS 25 CS 50 CS 50 GTS 50 - GTS 50 - TYPE 529 - GTS 50 TYPE 517-39 / 517-40 Star 1 Star 2 ZA 25, ZA 40 ZD 10,ZD 20 ZD 25 ZD 30 ZD 40 ZE 40 ZL 25 ZR 20 ZR 30
Wartung der Auspuffanlage
Die Auspuffanlage deines Mofa oder Mopeds ist ein wichtiger Bestandteil für die Leistungsfähigkeit - insbesondere bei Zweitaktern. Leider setzt sich diese mit der Zeit mit Ölkohle zu und verringert dadurch die Gesamtleistung des Fahrzeugs erheblich.
Du kannst die Auspuffanlage manuell reinigen (Zylinder-Auslass und Krümmer sowie zerlegbare Auspufftöpfe), von Rückständen befreien, soweit das möglich ist. Vom "Ausbrennen" der Anlage kann nur abgeraten werden - dadurch kann Dämmung und Chrom zerstört werden - möglicherweise ist das Moped dann lauter, aber nicht schneller geworden.
Verwende beim 2-Takter nur das vorgeschriebene Mischungsverhältnis! Zuviel Öl belastet die Umwelt, deinen Geldbeutel und ist für die schnelle Verkokung der Auspuffanlage verantwortlich. Eine Mischtabelle findest du hier.
Wenn der Auspuff schon in die Jahre gekommen ist, lohnt es sich diesen durch einen Neuen zu ersetzen um die ursprüngliche Motorleistung wieder zu erreichen.