Bearing bolt for breakerType 1

Bosch multi-range candle can be used for the old W 175 - 225 suitable for e.g.: DKWHummel DürkoppDianette Göricke343/345 Gritzner MilanoHercules 219, 220 Panther Rabeneick Rex Monaco, Como TriumphVictoria Avanti Zündapp Combinette 1/2 400-412, 422, 423,428,429 Zündapp Bergsteiger (M50)

Breaker with cable suitable for many mopeds - e.g.:Zündapp, Puch Maxi etc.

Breaker with cable suitable for many mopeds - e.g.:Zündapp, Puch Maxi etc.original Bosch

for various models with Bosch ignition, e.g. Zündapp (various) Kreidler, Puch Breaker with axle (corresponds to Bosch No. 1.217.013.021 e.g. for: Zündapp ZX 25 ZS 25 ZL 25 ZD 50 ZD 40 ZD 25 TS ZD 20 Shark 25 Shark 50 CS 25 CS 50 GTS 50 4 and 5 speed Puch Maxi built 01.1969 - 05.1979 Maxi S 0.8 HP Year 01.1969 - 05.1979 Maxi S 1.1 hp Maxi S 01.72 -05.79 Maxi L2 09.78 - 05.79 Maxi Sport 03.77 -05.79 Maxi 2-25 01.73 -05.79 Maxi X 30 A 4.74 - 12.81 Kreidler Flory MF 12

Breaker for various Bosch ignitions, small version - fits Sachs engines type 50 and 505Bosch Ref. no. 1207013005 Batavus Benelli DKW Hercles Ilo Sparta Zündapp 444 Automatic 1973/77 ZA 25 - 460 02 Automaic1979 ZA 45 - 450 03 Automatic 1971 ZB 22 - 447 A2 1978/80 ZD 10 - 446 21 Automatic 1977/79 ZD 30 - 446 20 Automatic 1978/ 80 ZR 10 - 44 7 11 Automatic 1978/80 ZR 20 - 447 02 1977/80 ZR 30 - 447 10 Automatie 1978/80 RixeChampion FTH - FT 1974/76Libelle FTH - FT - GTH 1974/78 Solo236 - 237 - 704 - 705706 - 708 1973710-711 - 712-713715 - 716 - Mars 1973423 Port 1976725 - 726 - 731 1976731 Sport - 732 Sport 1978 Mars 25 - 40 De Luxe 1973Mars Standard 25Top Rider 25 1973Mars Top Rider 1973 HerculesM1 - M2 - M3 MopedPrima 1 - 2 - 2N Moped

Cable grommet for Zündapp engines e.g. for: Zündapp 448 CS25 / CS50 448 HAI25 / CX25, HAI50 / CX50 517 529 C50 SPORT / GTS50 530 KS50/KS80 Engine 276/280 4-speed Engine 284 5-speed

Ignition capacitor different versions (solder or screw type) Capacitors are a frequent source of faults due to age and should always be replaced Diameter 18mm, for Bosch/Noris magneto ignition systems

DKW Hummel 101Suitable puller for M24 x 1.5 thread

Sachs fan wheel for Sachs engines 50/2, 50/3, 50/4 50/A3-hole mounting distance approx. 60mmAlso suitable for automatic engines.Reference number 0266 001 000

Feeler gauge for setting the contact breaker and ignition13 sheets0.05 - 1mm

passend für: Sachs 50/2 MA (NL/SF/X) MB, S, DK, C, D (NL) 50/2 MAK (SF), K (S, DK) 50/3 L (S) 50/3 MLA (X, NL), MLB, LHX 50/3 MLKB, MLKA (X), LKH 50/3 NL, C (NL), D 50/4 CF (NL), DF (X) 50/4 LF (NL), MLFA (NL) 50/4 MLFB, MLKAX, LKS, LKH

6 volt snare, universal with holder - alternating current

suitable e.g. for Hercules M 2 3 4 5,Sachs 505 engine,Zündapp,Kreidler

Ignition cable available in 5 mm or 7 mm diameter.Length per unit: 1 m Manufacturer: 5mm: Beru7mm: Herth+Buss

Ignition cable, 5mm - roll with 1.90 m

Ignition coil for 17 watt ignition systems with 85.5 mm diameter base plate (Bosch and Noris)Suitable for example for Victoria, DKW, NSU, and others.

New ignition coil for Bosch and Noris ignitions (hole spacing 53 mm)Suitable for example for: Express Radexi Zündapp KM 48/1 KM 48/2 KM 48/3 KM 48/4 KM 48/5 KM 50, Super Combinette 423, 433, Motor Type 266, Combinette 428, 429 Hercules 213 with Zündapp KM 48 / 50 engine, Sachs, ILO FP 50, NSU Quickly, Zweirad Union DKW, Victoria, Express Victoria Vicky 3 and 4 with M 50 and M 51 engines, Gritzner Göricke

Ignition coil suitable for various models, please measure and compare accordingly! Dimensions: Type 1: Overall length 73 mm, hole spacing 53 mm Type 2: Overall length 74 mm, hole spacing 50 mm Type 3: Overall length 77 mm, hole spacing 54 mm Type 4: Replacement is type 1

suitable for:Zündapp - C 50 Sport 517-21 Zündapp - C 50 Sport 529-010 Zündapp - C 50 Sport Type 517-028 Zündapp - C 50 Super 441-01 Zündapp - GTS 50 TYPE 517-39 / 517-40 Zündapp - GTS 50 TYPE 529 - 020 to 024 529-020 to 022, Zündapp - M 25 Bergsteiger 434-02 Zündapp - M 50 Bergsteiger 434-01 Zündapp - R 50 scooter 561-003 3-speed manual gearbox Zündapp - Sport-Combinette Type 515-041 Zündapp - Type 510 Sportcombinette Zündapp - ZD 20 Type 446-40 Zündapp - ZD 25 446-420 Zündapp - ZD 40 446-300 Zündapp - ZD 50 446-422

Ignition coil for Bosch ignition (small version) hole spacing approx. 46 mm, outlet to the rear. installed on many mopeds - e.g. e.g. for BATAVUS DKW GÖR1CKE HERCULES RIXE ZÜNDAPP, Zündapp 447, Sachs 502original Bosch no. 2204211071

Ignition coil type "Stefa" for various older moped engines.Dimensions: Hole centre - hole centre 49mm, total length 73mm

Ignition - version like Bosch - with brake light armature.e.g. for Zündapp, Kriedler, PuchZündapp C50 GTS KS ZR ZD ZX ZL ZA

Complete ignition system for Heinkel Perle, ready to install

Ignition system completely new,suitable e.g. for DKW/Zweirad Union Hummel, Victoria, Rex, IloVictoria: Avanti 106 Vicky Super-Luxus 107 Preciosa RM51 Vicky III Vicky IV Vicky Luxury Nicky R50 Vicky M50 engine Engine M51 (807/808) Vicky 3N Tory FM50 DKW Hummel Luxus 101 Bumblebee Standard 101 Bumblebee Super 102 Hummel Standard 112 Motor 801 ILO Motor ILO FP50 Motor ILO G50 Motor ILO G50/V50 Piano Motor HVA CM 25001. 2-speed Motor Pilot FM50 1L Motor Pilot FM 504. 2-speed Zündapp:Combimot - Base plate diameter: 85mm - Diameter pole wheel inside approx. 90 mm - Mounting distance ignition coil and light coil from hole centre to hole centre approx. 54mm - Pole wheel cone mounting 10/12mm

Contactless ignition 6 Volt 33 Watt Technical data: Flywheel, outer diameter: 116 mm. Stator plate, outer diameter: Ø = approx. 90 mm Stator plate, pin spacing c-c: approx. 79 mm (4 mounting holes) Primary/lighting coil, pin spacing c-c: approx. 54 mm Lighting coil: 6V-33W (intended for use with voltage regulator) Direction of rotation: anti-clockwise (left side) clockwise (right side) For crankshaft with taper: K1:5 (20%) and input diameter Ø = 12 mm Mounting holes for fan wheel: 4xM5 and 3xM6 Flywheel puller: M26x1.5 thread (see NTS item no.: 01-37-401) Circuit diagram for assembly is enclosed! Recommended bulbs/horn:Headlight: 6V-25/25WBrake light: 6V-5WTail light: 6V-3~4W suitable e.g. for: Sachs 50/1 MB, MA (X), M (I, NL) 50/2 MA (NL/SF/X) MB, S, DK, C, D (NL) 50/2 MAK (SF), K (S, DK) 50/2 MLA, MLB, MLC 50/3 H 50/3 L (S) 50/3 MA (I, NL, SF, X) MB 50/3 MAKF (SF, X), KF (S), BKF (S) 50/3 MK (X), MAK (SF), MKA (I) 50/3 MLA (X, NL), MLB, LHX 50/3 MLFB, LFH, LFS 50/3 MLKB, MLKA (X), LKH 50/3 NL, C (NL), D 50/4 CF (NL), DF (X) 50/4 EKF 50/4 LF (NL), MLFA (NL) 50/4 MLFB, MLKAX, LKS, LKH 50/A MAL (X), LS, ML (S), MLR (S, X), MLC 50/A MB, MA (SF, I, X) S, DL (X), E (X) 501 505/1 505/2 505/3 506 50S Two-wheeler Union (DKW/Victoria/Express) 136/166 159 TS/159 TS Super DKW 139M (MK4M) DKW Hummel Standard 113 DKW Hummel Super 116/126/156 DKW RT159 Jet (K50 Sprint) DKW RT159E (K50SE) DKW RT159ES (K50RE) DKW, Victoria 115/155 (tin can) DKW/Victoria 139 S DKW/Victoria 159 Jet Express Super 126/156 Express TS, (Touring Sport) 113 Engine 802 Engine 803 Engine 804 Engine 805 RT 159/RT 159 Super Victoria Vicky Standard/Super 117/126/156 Violetta/Avanti/Carino 128/158 Zündapp 428 Combinette (265, 2-g) 429 Combinette (266, 3g) 433 Super Combinette (266, 3g) 434 M50 Bergsteiger (247, 2g) 435 Falconette (267, 3g) 440 C50 Super (265, 2g) 441 C50 Super (266/278, 3g) 446 ZD20/25/50 (278 3-speed manual transmission) 446 ZD40 (278 3-speed foot-operated gearbox) 448 CS25/CS50 448 HAI25/HAI50/CX25/CX50 460 ZE (278, 3-vxl. foot shift) 460 ZX/X/ZL/ZS (278, 3-g manual gearbox) 510 Falconette (276, 4g) 510 Sport Combinette (267, 3g) 515 Sport Combinette / KS50 (267, 3g & 276, 4g) 517 C/CS50/GS/GT50 (278, 3g NL) 517 GTS50 (280, 4g) 517 KS50/GTS50 (280, 4g) (NL) 529 C50 Sport (278, 3g) 529 CS50 (278, 3g) (NL) 529 GTS50 (280, 4g) (DE) 529 GTS50 (284, 5-g.)(DE) 529 KS50/GTS50 (280, 4g) (NL) Engine 247 Engine 265. 2-speed Engine 266. 2-speed Engine 267. 3-speed Engine 276. 4-speed Engine 278. 3-speed Engine 280. 4-speed Engine 284. 5-speed

Complete new ignition generator for NSU Quickly -Ready to install without soldering!with black, reinforced ignition coilAdvantages: very strong ignition spark ready mounted with cable (no soldering) Extremely durable Very low susceptibility to faults Quick to replace Ignition coil in original design with wide pole shoes! Each ignition is tested individually on the test bench Light output 17 watts, incl. pole wheel.Suitable for all models.

Easy-to-use ignition adjusterDetermine top dead centre, set pre-ignition - that's itIs screwed into the spark plug thread.

New insulating strip for all engines with ignition coil type 1 (coil hole spacing 53mm)

Lubricating felt with holderSuitable for moped magneto ignition systems from Bosch and Noris

Lubricating felt for ignition plate (rivet version)

Motobecane Mobylette breaker for M1, Cady, Moby

Ignition cable Mobylette M1 M3 140, 150 TL Novi ignition coil

MBK Mobylette ignition coil M1 CadySuitable for the models:4050Mini140 TL150 TL

Light coil for Mobylette types 140 and 150

New base plate for Mobylette M3

Rubber cable for ignition coil output ignition cable

Fastening screw set for ignition

Spark plug connector, original Beru, water-protected and interference-suppressed

Buzzetti brand tester for testing the spark. The tester can be used to check the strength and quality of the spark. An adjustable spark gap is displayed, which can also be increased or reduced via an adjustment.

für viele Mopeds mit Bosch Zündung z.B. Agria Solo Steyr-Daimler-Puch Hercules Kreidler KTM Puch Tomos Bucher auch für folgende Zündapp Modelle: Zündapp: C 50 Sport (Typ 529-010) C 50 Super (Typ 441-01) GTS 50 (TYP 529 – 020 - 024) GTS 50 (TYP 529 – 026 - 029) M 25 Bergsteiger (Typ 434-02) M 50 Bergsteiger (Typ 434-01) R 50 Roller (Typ 561-003) 3-Gang Handschaltung ZD 25 (Typ 446-420) ZD 40 (Typ 446-300) ZX 25 (Typ 460-010) ZX 25 (Typ 460-013)

Woodruff key crankshaft - Ignition

Cable grommet for Zündapp engines e.g. for Zündapp - C 50 Sport 517-21 Zündapp - C 50 Sport 529-010 Zündapp - C 50 Sport Type 517-028 Zündapp - C 50 Super 441-01 Zündapp - R 50 Scooter 561-003 3-speed manual gearbox Zündapp - RS 50 Scooter Zündapp - C 50 Supercombinette Type 429 Supercombinette Zündapp - Type 433 Supercombinette Zündapp - Type 510 Sportcombinette Zündapp - X 25 460-014 Zündapp - ZE 40 Type 460-09 Zündapp - ZL 25 460-04 Zündapp - ZS 25 Type 460-05 Zündapp - ZX 25 460-010

passend für Moped Magnetzündanlagen z.B. NSUU Quickly, DKW, Victoria.Bitte die Abmessungen beachten, da es verschiedene Zündungen gibt.Abmessungen:Gesamtlänge 77 mm, Lochabstand 54 mm 

passend z.B. für Sachs 503Zündapp, KreidlerAußendurchmesser der Grundplatte: 80 mmInnendurchmesser: 19 mmBefestigungsabstand Montagelöcher (Langlöcher, Mitte zu Mitte): 65 mmModell: Bosch orig Bosch Zündspulennummer 2 204 211 051