23 X 2.50 (1.50 -A19) - hallmarked - 36 holes - hole diameter 6.5 mmChrome rim for various vintage mopeds e.g. DKW, Victoria, Miele, NSU, Zündapp
with connection for car valve - classic design, painted silver - Total length 29 cm
FAG ball bearing for crankshaft (2 required) and gearbox shaft (1 required)
Bowden cable set for Zweirad-Union (DKW, Victoria types 102) Hummel Super, Standard 5-piececonsisting of double shift cable 3 speed Foot brake cable (nipple version) please compare! Handbrake cable Throttle cable Clutch cable Made in Germany
DKW Hummel Standard and Luxus Type 101 as well as Victoria Vicky3, Nicky(100 X 15)Original FORMA 1st supplier quality, no Far East import!
e.g. for DKW Hummel, Victoria type 115, 136, 155, 166 20 mm wide, for brake drum with 120 diameter115X20
Ignition capacitor different versions (solder or screw type) Capacitors are a frequent source of faults due to age and should always be replaced Diameter 18mm, for Bosch/Noris magneto ignition systems
Chain sprocket for DKW Hummel, Standard, Luxus and Super with engine type 801, 13 t.
19 - 2 unpunched version, chrome-plated 36 holes - hole diameter 6 mm. for many mopeds of the 50s and 60s - e.g. Hummel Luxus, Hummel Standardmany mopeds with Sachs hubs Victoria Vicky Rex
e.g. suitable for the following models - however, please note the diameter of 78 mm (light outlet), as some vehicles were equipped differently depending on the year of manufacture. Diameter to housing: approx. 90 mm Bauer, Gritzner, Panther, Rixe, NSU, Express-Radexi, Goebel, Göricke, Heidemann, Meister, Miele, Rabeneick, Rex, Vicky III DKW Hummel Zündapp Combinette Hercules 215 and 216
Clutch lever for older 3-speed gearshift controls from Magura suitable e.g. for Ardie Dürrkopp NSU-Quickly Sachs Ilo DKW
New cylinder head for DKW mopeds without blower.e.g. for: DKW Hummel Standard 112 DKW Hummel Standard 113 DKW Hummel Super 102 DKW Hummel Super 116/126/156 DKW, Victoria 115/155 (tin can) Express Super 126/156 Express TS, (Touring Sport) 113 Engine 803 Engine 804 Engine 805 Victoria Vicky Standard/Super 117/126/156 Violetta/Avanti/Carino 128/158
Gear shift cable 3-speed for DKW Hummel and similar Victoria models
consisting of: Bearing flanges (9003313) 2 pieces Dust cap (9000381102) 2 pieces Sealing washer (9000382302) 2 pieces Felt ring (9000383002) 2 pieces Ball 24 pcs Fixed cone Adjustment cone Cages and flanges made of hardened steel with precision-ground raceways Ball bearings balls from SKF with uniform tolerance for optimal running properties Dust seal that effectively protects against dirt, moisture and contaminants Wheel bearing cone: M12x1 Ø = 22mm Bearing flange Ø: 32mm Surface treatment: Galvanised Balls: 7/32" (5.556 mm) Number of balls: 24 pieces fits Union hub 100mm (see illustration)
Complete set of Bowden cables for DKW Hummel Zweirad Union,Type 101Consisting of:3-speed gearshift cableHandbrake cableThrottle cableClutch cableRear brake cable with threaded rodTop quality Made in Germany
DKW Hummel 101Suitable puller for M24 x 1.5 thread
New sprocket for DKW Hummel 101 with 33 teeth, as original.
Headlight insert for Hummel 101 models with integrated headlight,Hummel 102,112 and 113.Attention: Headlight light is not adjustable!for bulb 6V BAX 15 D
Öleinfüllschraube, Ölkontrollschraube und Ölablasschraube für DKW Hummel Motor 801, jeweils mit Dichtung
Bearing set with shaft seals for DKW Hummel engine 801consisting of 4X ball bearing FAG + 6 shaft seals and 1 fibre seal ring
Length 68 cm ; Elbow connection : 26 mm Diameter approx. 60 mm - Distance from elbow connection to start of bracket approx. 28.2 cm
26 mm manifold connection, total length (measured in the centre of the bend) approx. 18cm DKW Hummel Standard - short version
suitable for many older mopeds from the 50s and 60s
Colour: cream Length = 100mm, Inner diameter: 23.5 mm For various twist grip fittings (shift twist grip, throttle twist grip) This model was mainly used in the 1950s .
For various models with 22 mm handlebars.Suitable e.g. for:NSU-QuicklyDKW-HummelVictoriaRexand many more.for M8 mounting screws
chrome-plated22mm handlebar - same thickness throughout! (No thickening or similar) Total length: 60 cm, Total height approx. 12 cm, Centre section approx. 14 cm.For various mopeds: e.g. REX Monaco, NSU Quickly, DKW, Triumph and many more.
Ignition system completely new,suitable e.g. for DKW/Zweirad Union Hummel, Victoria, Rex, IloVictoria: Avanti 106 Vicky Super-Luxus 107 Preciosa RM51 Vicky III Vicky IV Vicky Luxury Nicky R50 Vicky M50 engine Engine M51 (807/808) Vicky 3N Tory FM50 DKW Hummel Luxus 101 Bumblebee Standard 101 Bumblebee Super 102 Hummel Standard 112 Motor 801 ILO Motor ILO FP50 Motor ILO G50 Motor ILO G50/V50 Piano Motor HVA CM 25001. 2-speed Motor Pilot FM50 1L Motor Pilot FM 504. 2-speed Zündapp:Combimot - Base plate diameter: 85mm - Diameter pole wheel inside approx. 90 mm - Mounting distance ignition coil and light coil from hole centre to hole centre approx. 54mm - Pole wheel cone mounting 10/12mm
Original Conti inner tube for tyre sizes 23 X 2.00, 23 X 2.25 and 23 X 2.50 with auto valve (new designation 2-19, 2 1/4 19 and 2 1/2 -19)
Karcoma" brand filter,6 mm connection on both sides Very compact petrol filter with the following dimensions:Diameter 18mmoverall height 50 mm
fit for:DKW Hummel 101 DKW Hummel 102 DKW Super Hummeland similar Models from Zweirad-Union
High-quality BUMM brand mirror with handlebar mounting for the left side of your moped. The mirror is specially designed to be directly integrated into the handlebar, ensuring seamless integration and a clear view of traffic behind. The durable housing guarantees longevity and protection against weather influences. Easy to install,
Hercules MK 2 with aluminium wheels, Hercules Prima P 4, 5, 5N, Prima 25, Mopedand mokick Hercules, Sachs, Zündapp, KTM
Reinforced brand chain from Wippermann
Clamp clamp Between manifold and pot suitable e.g. for Zündapp and others C 50 Sport 529-010 C 50 Super 441-01 GTS 50 - TYPE 529 - 020 - 024 M 25 Bergsteiger 434-02 M 50 Bergsteiger 434-01 Type 510 Dimensions: Inner diameter approx. 28 mm, width approx. 20 mmchrome-plated
Glass for various mopeds with 78mm light outlet - please note! suitable for Union headlights on many mopeds e.g. for Bauer Gritzner Express Radexi I and Radexi II Panther Rixe Göbel Göricke Heidemann Master craftsman Miele Rabeneick REX Vicky III
with 6mm hose connection. The petrol filter can be dismantled and cleaned, Made in Italy. Dimensions: - Outer diameter approx. 22mm - Total length approx. 64mm - Filter length approx. 40mm - Length of the connections approx. 12mm
Petrol hose, clear - new quality! - Petrol and oil resistantUnit 1 m
Petrol tap DKW Hummel, with removable operating handle
Headlight insert for moped headlights ("Union" headlights)Light outlet 78 mm, suitable e.g. for Vicky 3, DKW Hummel 101 - old version (with separate headlight)
for Union rear light suitable e.g. for DKW Hummel, NSU Quickly L DKW - Zweirad-Union: Hummel Luxus, Hummel Standard, Super Hummel, Victoria (ZU)
Starting rubbers (set of 6 pieces) for various Zweirad-Union mopeds: e.g.: DKW Victoria Hummel Super, VickyStandard, Vicky Super,Express Supertypes 102 , 116, 117, 126, 156Dimensions:outer diameter approx. 20mm,inner diameter approx. 16mm,width approx. 11mm.
original rubber grommet for DKW Hummel 101 frame
